|Reduce part setup time and
Eliminate Specialized Fixtures!
thin, flat, or irregular shaped
The base and top plate of the Vacuvise are constructed of high-grade anodized
aluminum with stainless steel fastener hardware. Delrin strips are used for part squaring.
For part-holding, foam gasket material fits into the grid matrix channels to create a
vacuum seal around the part periphery. Side clamps and Mitee Bites clamps provide an
additional holding option.
| • Keyed
for quick set up
aluminum, plastic, ferrous
configured to hold thin,
for machining under
|2 table sizes available|
The 12" x 12" table comes with the following
2 - 11" low profile plastic guide bars.
The 24" x 16" table comes with the following
4 - 11" low profile plastic guide bars.
off shop air.
|Typical Vacu-Vise™ Fixturing Examples
| • All
cuts are made at 60%
cutter width at 5000 rpm
with a holding vacuum
of 27" HG (13PSI).
Requires at least 85 psi of
• Uses 1.2 to 1.8 cfm.
Electric Vacuum pump
in Motion's experience in CNC control replacement can benefit your
Call us (714) 528-7061
Home page | New
Machinery page | Request a
Quotation | Control
| Upgrade your current Centroid control | On-site service | Send me literature or DVD presentation |
| CNC retrofit controls | M-400ATC | M-400 | M-39 | T-400 | T-39 | NEWS | Why Centroid |
| Centroid control Options | Intercon off-line | Digitizing | Probing | TT-1 Tool touch-off |
| Lathe tool Turret | VacuVise | Rotary tables | Gallery of completed installations |
| Engraving Software | CHNC Package | Downloads page | Do it yourself |
| Standard terms and conditions |
us directly or Email us at firstname.lastname@example.org
(c) Copyright 2007 Machines in Motion