All-in-One DC servo system.
Graphical price sheet displays the components required to build your own Centroid CNC control. Choose this hardware set when using DC servomotors of 40"/lbs or less in size.
See our installation video:
Use your BACK button to return to this page.
|
 |
Wired electrical enclosure.
Graphical price sheet displays the components which have been installed and wired into our NEMA electrical enclosure. Choose this hardware set when using DC servomotors of 40"/lbs or less in size. We can supply the servo motors and encoders or use your own. Our most "simple to install " control.
|
 |
GPIO4 universal system.
Graphical price sheet displays the components required to build your own Centroid CNC control. Choose this hardware set when you are using most any off the shelf servo motor & drive set. Provides an industry standard + - 10VDC analog signal to your chosen servo drive.
|
 |
Fanuc servo based system.
Graphical price sheet displays the components required to build your own Centroid CNC Control. This hardware set has been specifically configured to control your existing Fanuc Yellow Cap servo drives and motors. Red Cap motors will not wok with this system.
|
 |
M-400 Milling control includes flexible features for use in
- 1 axis up to 8 axis
- Routers
- Water jet cutters
- and many speciality built production machines.
|
 |
T-400 CNC Turning control for use with:
- Horizontal Lathes
- vertical Lathes
- Center type grinding applications.
|
 |
M-39 milling control is built with the same electronics and software but does not include our professional CNC Console.
We provide a shelf for conveniently locating your choice of monitor & keyboard. The Push button Jog pendant is optional however, it is so valuable that we always include it.
|
 |
Specialized Lathe packages have been developed for the:
Hardinge CHNC/HNC
Mori Seiki SL series of turning centers.
|
 |
Specialized mill packages have been developed for the Bridgeport BOSS series of knee mills.
Our standard M-400 or M-39 controls will fit onto the Shizuoka AN-s Line of knee mills without any special configuration.
|
 |
DX-1 Single axis controller. Originally designed for use with our CNC rotary tables this powerfully control has also been used for back gage positioning and other creative uses. |
 |
Centroid's own Digitizing software package can be added to most any version of Centroid CNC controller. Touch probe required. |
 |
Centroid imports their own line of CNC controlled rotary tables . Several models are available from the small 5C indexer up to our RT-320mm with its (12.6") diameter faceplate. These are plug & play for most Centroid CNC control systems. |
 |
DP-7 Ultra Precision Touch Probe.
This new application of a proven technology has increased the accuracy of our touch probing & digitizing by a factor of 10!
|
 |
TT-2 Tool Touchoff sensor.
As you might guess this model will set tool length AND tool diameter. The TT-2 has been engineered to work with machine spindles using ceramic bearings as well as tooling with non conductive diamond coatings.
|
 |
DP-4 Centroid's original Touch Probe.
This simple device is built with proven technology. Increase the accuracy of your part setup with this the lower cost, DP-4 touch probe. |
 |
TT-1 Centroid's original Tool Touchoff sensor.
Assembled in 2 pieces for easy rebuilding (in the event of a crash). Will automatically find and install the tool length offset of each tool. |
 |
For use with either the DP-4 or DP-7 touch probes. Probing software will accuratly locate your part or fixture during setup. Read more. |
 |
M15 to M39 CNC control upgrades.
The M-15 control has been out of production for a long time. With the old DOS motherboards no longer available, Centroid is offering this upgrade pathway to keep your machine in production.
|
 |
|
|
|
|
|
|
|
|