Click on the image to download that document.



All-in-One DC servo system.
Graphical price sheet displays the components required to build your own Centroid CNC control. Choose this hardware set when using DC servomotors of 40"/lbs or less in size.
See our installation video:

Use your BACK button to return to this page.

All in one price sheet

Wired electrical enclosure.

Graphical price sheet displays the components which have been installed and wired into our NEMA electrical enclosure. Choose this hardware set when using DC servomotors of 40"/lbs or less in size. We can supply the servo motors and encoders or use your own. Our most "simple to install " control.

All in One Wired enclosure

GPIO4 universal system.

Graphical price sheet displays the components required to build your own Centroid CNC control. Choose this hardware set when you are using most any off the shelf servo motor & drive set. Provides an industry standard + - 10VDC analog signal to your chosen servo drive.

Centroid GPIO4d Board level price sheet

Fanuc servo based system.

Graphical price sheet displays the components required to build your own Centroid CNC Control. This hardware set has been specifically configured to control your existing Fanuc Yellow Cap  servo drives and motors. Red Cap motors will not wok with this system.

Centroid Control 
      retrofit for Fanuc controls.

M-400 Milling control includes flexible features for use in

  • 1 axis up to 8 axis
  • Routers
  • Water jet cutters
  • and many speciality built production machines.
Centroid M-400 
CNC retrofit control

T-400 CNC Turning control for use with:

  • Horizontal Lathes
  • vertical Lathes
  • Center type grinding applications.
Centroid T-400 
  CNC retrofit control

M-39 milling control is built with the same electronics and software but does not include our professional CNC Console.

We provide a shelf for conveniently locating your choice of monitor & keyboard. The Push button Jog pendant is optional however, it is so valuable that we always include it.

Centroid M-39 CNC 
      retrofit control

Specialized Lathe packages have been developed for the:

Hardinge CHNC/HNC

Mori Seiki SL series of turning centers.

Centroid Retrofit control for Hardinge CHNC

Specialized mill packages have been developed for the Bridgeport BOSS series of knee mills.

Our standard M-400 or M-39 controls will fit onto the Shizuoka AN-s Line of knee mills without any special configuration.

Centroid M-39 CNC retrofit control for Bridgeport mill DX-1 Single axis controller. Originally designed for use with our CNC rotary tables this powerfully control has also been used for back gage positioning and other creative uses. Centroid DX-1 Single axis CNC retrofit control
Centroid's own Digitizing software package can be added to most any version of Centroid CNC controller. Touch probe required. Centroid Digitizing software Centroid imports their own line of CNC controlled rotary tables . Several models are available from the small 5C indexer up to our RT-320mm with its (12.6") diameter faceplate. These are plug & play for most Centroid CNC control systems.

DP-7 Ultra Precision Touch Probe.


This new application of a proven technology has increased the accuracy of our touch probing & digitizing by a factor of 10!

Centroid DP-7 Touch Probe dp7

TT-2 Tool Touchoff sensor.

As you might guess this model will set tool length AND tool diameter. The TT-2 has been engineered to work with machine spindles using ceramic bearings as well as tooling with non conductive diamond coatings.

TT2 tool touchoff
DP-4 Centroid's original Touch Probe.
This simple device is built with proven technology. Increase the accuracy of your part setup with this the lower cost, DP-4 touch probe.
Centroid DP-4 
            Touch probe TT-1 Centroid's original Tool Touchoff sensor.
Assembled in 2 pieces for easy rebuilding (in the event of a crash). Will automatically find and install the tool length offset of each tool.
Centroid TT1 Tool Touchoff
For use with either the DP-4 or DP-7 touch probes. Probing software will accuratly locate your part or fixture during setup. Read more.  Centroid Probing software

M15 to M39 CNC control upgrades. 

The M-15 control has been out of production for a long time. With the old DOS motherboards no longer available, Centroid is offering this upgrade pathway to keep your machine in production.

M15 M39 Upgrade Centroid
       
       
 
Machines in Motion's experience in CNC control replacement can benefit your business. 
 Call us  (714) 528-7061

 
 
Put us to work for you 
cnc mill, cnc retrofit, cnc control, cnc machine
cnc mill, cnc retrofit, cnc control, cnc machine
 
Machines in Motion Inc.  877 733-5500        

cnc mill, cnc retrofit, cnc control, cnc machine

| Controls Home page | New Machinery page | Request a Quotation | Control Financing | Video |
| All in 1 Kit | Upgrade your current Centroid control | On-site service | |
| VALUE | CNC retrofit controls | M-400ATC | M-400 | M-39 | T-400 | T-39 | NEWS | Why Centroid |
|Anilam CNC control Upgrade | Intercon off-line | Digitizing | Probing | TT-1 Tool touch-off | Bandit Retrofit |
| Plug & play |Centroid control Options | Rotary tables | Gallery of completed installations | Fanuc retrofit | K2
| Engraving Software | CHNC Package | Downloads page |Do it yourself | Bridgeport Retrofit |
Standard terms and conditions || cnc retrofit control | DAC Control Upgrades | Current Project |

Centroid CNC Retrofit by Machines in Motion, Inc.

Contact us directly or Email us at Centroid.controls@gmail.com
(c) Copyright 2018 Machines in Motion